Lexus RC350 & RCF Forum banner
1 - 20 of 28 Posts

·
Registered
Joined
·
167 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
1,404 Posts
I can see them changing things up a lot over time, all they really need to do is keep the spindle outline and everything else inside can be changed... which is along the lines of what we have been seeing.
 

·
Registered
Joined
·
1,016 Posts
I think that the grille looks better when it is filled in with the crosshatch pattern. That looks better than the vertical slats. I think the vertical slats make it look like a moustache. And there needs to be continuity with the whole grille, not one things at the top half and another at the bottom half.

 

·
Registered
Joined
·
354 Posts
I think that the grille looks better when it is filled in with the crosshatch pattern. That looks better than the vertical slats. I think the vertical slats make it look like a moustache. And there needs to be continuity with the whole grille, not one things at the top half and another at the bottom half.

That's the RC350, so that look which doesn't look nearly as good as what's found on full on F models (RC-F, GS-F, etc) is to be expected, after all they need to justify what the top of the line pack has while keeping lower models in their place... can't get that confused.
 

·
Banned
Joined
·
742 Posts
That's the RC350, so that look which doesn't look nearly as good as what's found on full on F models (RC-F, GS-F, etc) is to be expected, after all they need to justify what the top of the line pack has while keeping lower models in their place... can't get that confused.
not to mention giving a visual reason to upgrade...

I dont think it would look good in all vertical slats.. too much like a waterfall, it would compete with the angular design of the car... IMO
 

·
Registered
Joined
·
1,016 Posts
Even if they don't switch all the grilles to the crosshatch pattern, I think that there is something a little better than what is on the RC350 right now. I think that the grille should be filled in with all one pattern and not split into three different sections. What that pattern is, I'll leave up to Lexus.
 

·
Registered
Joined
·
167 Posts
Discussion Starter · #8 ·
I wouldn't mind it being all crosshatch or vertical slats as long as they stick with one design. The current grille gives it a bit of a mustache look. It doesn't look the best but it does give you the opportunity to stick this on:
 

·
Premium Member
Joined
·
310 Posts
I wouldn't mind it being all crosshatch or vertical slats as long as they stick with one design. The current grille gives it a bit of a mustache look. It doesn't look the best but it does give you the opportunity to stick this on:

That is exactly what I was thinking. That image is great, thanks for the chuckle.
 

·
Registered
Joined
·
354 Posts
I'm still wondering if some aftermarket company might come along and come up with some way to make this grille their own with some sort of insert or something since there's quite a lot of space here to work with... a lot of creative juices to flow.
 
1 - 20 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top