Uninstall wasn’t hard at all. All you need is a 14mm socket and wrench. Used a pair of adjustable pliers to remove the hangers by squeezing them off the hooks. Also sprayed lubricant to help get them off and back on. Is a tight fit on the top of the exhaust where it touches the bottom bumper. What was difficult was getting the bottom hangers back on the hooks so I ended leaving off the bottom on both sides. Exhaust is pretty sturdy so not much movement anyway. If this becomes an issue down the road maybe I’ll put those on. Does seem if you do put those on the exhaust may seem to hang a bit uneven. Definitely a deeper sound from the stock exhaust which is what I was looking for.